TRANSPARENT NON HEAT SEALABLE ONE SIDE CORONA TREATED
CORONA TREATED NON HS LAYER
OPP CORE LAYER
UNTREATED NON HEAT SEALABLE LAYER
Description
TRANSPARENT NON HEAT SEALABLE ONE SIDE CORONA TREATED FILM
Features
Excellent Mechanical properties
Good Flatness
No back Treatment
Good Optics
Application
ADHESIVE TAPE AND TEXTILE BAGS
THE BIG DIFFERENTIATORS
01
Corona Oxidation Treatment
Without reverse side treatment, no bonding or mass transfer took place.
02
Good Film Flatness
Consistent adhesive coating.
03
Strong MD tensile properties with high elongation
Excellent efficiency of the automatic tape dispenser machine.
04
Good Clarity
Excellent quality images.
05
Strong Adhesion & Reliable Hot Melt Bond
Effective corona treatment enhances bonding and peel strength.
PROPERTIES
TEST METHOD (ASTM)
UNIT
TYPICAL VALUES
TPT-23
TPT-29
TPT-36
TPT-40
TPT-51
PHYSICAL
Thickness
ASTM D 374
MICRON
23
29
36
40
51
Grammage
NTM
gm/m²
20.93
26.39
32.76
36.40
46.41
Yield
NTM
m²/kg
47.8
37.9
30.5
27.5
21.5
Thickness variation
%(±)
3
3
3
3
3
SURFACE
Treatment Level (min)
ASTM D 2578
dyne/cm
38
38
38
38
38
OPTICAL
Haze
ASTM D 1003
%
1.0-2.0
1.0-2.0
1.0-2.0
1.0-2.0
1.0-2.0
Gloss
ASTM D 2457
-
90-92
90-92
90-92
90-92
90-92
MECHANICAL
Coefficient Of Friction
ASTM D 1894
Static
Kinetic
0.40-0.45
0.40-0.45
0.40-0.45
0.40-0.45
0.40-0.45
0.30-0.40
0.30-0.40
0.30-0.40
0.30-0.40
0.30-0.40
Tensile Strength
MD
TD
ASTM D 882
kg/cm²
≥ 1200
≥ 1200
≥ 1200
≥ 1200
≥ 1200
≥ 2200
≥ 2200
≥ 2200
≥ 2200
≥ 2200
Modulus
MD
TD
ASTM D 882
kg/cm²
≥ 17000
≥ 17000
≥ 17000
≥ 17000
≥ 17000
≥ 24000
≥ 24000
≥ 24000
≥ 24000
≥ 24000
Elongation
MD
TD
ASTM D 882
%
140-180
140-180
140-180
140-180
140-180
40-80
40-80
40-80
40-80
40-80
THERMAL
Shrinkage at 120°C/5min
MD
TD
ASTM D 1204
%
2.0-4.0
2.0-4.0
2.0-4.0
2.0-4.0
2.0-4.0
1.0-3.0
1.0-3.0
1.0-3.0
1.0-3.0
1.0-3.0
STORAGE & HANDLING
NAHAROPP™ does not require special storage conditions. it is recommended to storage below 30°C in order to avoid any deterioration of the film surface properties. it is advisable to use the material on FIFO basis. The film should be kept at operating environment for 24 hours before processing. Material should be use before 3 months from dispatch
FOOD CONTACT
NAHAROPP™ Follow with EU and FDA regulations. MSDS are available on customer request.
DISCLAIMER
The values given in this technical datasheet are typical performance data and are believed to be accurate .These are given in good faith but it is for the customer to satisfy of the suitability for its
own particular purpose. NAHAR POLY FILMS LTD. Suggests to the customer to confirm these values and product compatibility prior to their use and the company offers neither guarantee nor
accept any responsibility for the fitness of the product for any other use. Post-consumer recycled material is not used.
NTM: NAHAR TEST METHOD, MD : MACHINE DIRECTION ,TD : TRANSVERSE DIRECTION
.png)
